Night Vision Glossary
Updated: Oct 28
Night Vision Glossary: Essential Terms for Understanding Night Vision Technology

Understanding Night Vision Technology
The night vision world is filled with unique terminology. This glossary breaks down the most common terms you need to know.
Automatic Brightness Control (ABC)
ABC is an electronic feature in image intensifier power supplies. It automatically adjusts voltages to the microchannel plate. This keeps brightness within optimal limits, protecting the tube. You’ll notice this when moving from low-light to high-light conditions. The image brightens, then suddenly dims to a constant level.
Auto-Gated Power Supply (Autogate)
Autogate technology is crucial in modern night vision systems. It activates during dynamic light conditions. This ensures optimal resolution and contrast. When exposed to sudden bright light, the system quickly adjusts the power supply. This prevents momentary blindness and maintains visual acuity. Users can continue their nighttime missions without disruption. It also protects the tube from bright light damage. Automatic gain control is vital in urban settings or areas with background light.
Binocular
A binocular night vision system allows viewing through two channels, one for each eye. A prime example is the LLI MH-1.
Biocular
Biocular systems display a single image source for both eyes. The AN/PVS-7 is a commonly used bi-ocular system.
Black Spots / Blems
These are cosmetic blemishes in the image intensifier. They can also be dirt or debris between the lenses. Black spots do not affect performance or reliability. Most manufacturers measure and record these spots during quality assurance.
Black Boxing
This method stimulates the “self-healing” process of some image intensifiers. The device runs for extended periods in complete darkness.
Blooming
Blooming refers to a phenomenon similar to halo effects.
Bore Sighting
Bore sighting defects appear as bright spots in the image area. These are caused by flaws in the film on the microchannel plate.
Bright Spots
Bright spots are defects in the image area, similar to bore sighting. They usually disappear when light is blocked.
Bright-Source Protection (BSP)
BSP reduces voltage to the photocathode when exposed to bright light. This protects the image tube and enhances its lifespan. However, it lowers resolution during operation.
Burn-in
Burn-in areas are less bright than the rest of the image. They occur due to exposure to bright light. Burn-ins can sometimes be reverted using Blackboxing or Whiteboxing.
Chicken Wire
This defect manifests as thin dark lines in the field of view. Under extreme conditions, they form hexagonal or square wave shapes.
C-Mount
C-Mount is a standard thread size for mounting lenses to cameras. It typically measures 1/2″ or 3/4″ in diameter.
COMSPEC (Commercial Specification)
COMSPEC describes image tube quality, testing, and inspection by the original equipment manufacturer (OEM).
Date of Manufacture (DOM)
DOM indicates when the device was manufactured.
Daylight Lens Cover
This cover is made of soft plastic or rubber. It has a pinhole to allow limited light into the night vision device. Use it only for training, not for extended periods.
Diopter
Diopter measures eye correction or lens refractive power. Adjustments accommodate individual eyesight differences. Most night vision systems offer a +2 to -6 diopter range.
Distortion
Distortion in night vision systems can come from optics design or manufacturing flaws.
Classical Optical Distortion: This occurs when straight lines curve at the edge of the field of view.
Fiber Optics Manufacturing Distortions: These include S-distortion and shear distortion.
Edge Glow
Edge glow appears as a bright area in the outer portion of the viewing area.
Emission Point
An emission point is a steady or fluctuating bright light in the image area. It does not disappear when all light is blocked. If it remains bright under all conditions, the system needs repair.
Equivalent Background Illumination (EBI)
EBI measures light seen through a night vision device when the image tube is on, but no light hits the photocathode. The lower the EBI, the better the device performs in low-light conditions.
Eye Relief
Eye relief is the distance from the eyepiece to achieve the optimal image area. It is usually measured in mm.
Field-of-View (FOV)
FOV is the angular extent of what can be seen with an optical instrument. A wider FOV allows for more visibility. It is measured horizontally, vertically, and diagonally.
Figure of Merit (FOM)
FOM measures image intensifier tube performance. It is derived from the number of line pairs per millimeter multiplied by the signal-to-noise ratio. The higher the FOM, the better the image quality.
Filmed or Unfilmed / Filmless
This categorization refers to the Micro Channel Plate (MCP) in the image intensifier. Filmed MCPs provide protection and long life. Unfilmed MCPs offer higher signal-to-noise values but less protection.
Fixed-Pattern Noise (FPN)
FPN appears as a faint hexagonal pattern in high-light conditions. It is inherent in Gen 2 and Gen 3 systems.
Footlambert (fL)
Footlambert is a unit of brightness equal to one footcandle at a distance of one foot.
Focus Range
Focus range defines how far an optical device can adjust to focus on a target.
Gain
Gain, or brightness gain, amplifies light input. The higher the gain, the better the performance. Gain is measured in cd/m²/lx or fL/fc.
Gallium Arsenide (GaAs)
GaAs is the semiconductor material used in Gen 3 photocathodes.
Generations of Image Intensifiers
Generations (Gen) refer to advancements in night vision technology. Higher generations mean more sophisticated technology.
Gen 0: Early image converters used S-1 photocathodes.
Gen 1: Developed in the 1960s, used during the Vietnam War.
Gen 2: Introduced microchannel plates in the late 1960s.
Gen 3: Developed in the 1970s, used gallium arsenide for improved sensitivity.
Gen 4: A brief term for Gen 3 tubes without ion barrier film.
Ghosting
Ghosting is a temporary bright spot caused by exposure to bright light. It usually disappears after some time.
Halo
A halo appears around bright lights. It is caused by elastic collisions of electrons with the microchannel plate surface.
Highlight Shut Off
This feature turns the system off during extremely bright light conditions.
I² (Image Intensification)
I² collects and intensifies available light in the visible and near-infrared spectrum.
Interpupillary Adjustment
This adjustment sets the distance between the user’s eyes for binocular optics.
Interpupillary Distance (IPD)
IPD measures the distance between the user's pupils. The 95th percentile of U.S. military personnel falls within the 55 to 72mm range.
IR (Infrared)
IR is outside the visible spectrum and cannot be seen by the human eye.
IR Illuminator
IR illuminators emit invisible light. They can be built-in or mounted separately. They enhance image contrast and eliminate shadows.
IR Laser
IR lasers provide long-range illumination but are not eye-safe. They must be marked with warning labels.
Image Intensifier Tube (IIT)
IIT collects photons and amplifies them as electrons. This allows viewers to see more light.
Low Voltage Indicator
This device signals low battery power in night vision systems.
Lumen
Lumen measures photons perceptible by the human eye in one second.
Magnification
Magnification indicates how much larger an image appears compared to the naked eye.
mA/W (Milliamps per Watt)
This measures electrical current produced by a photocathode when exposed to light.
Micro Channel Plate (MCP)
MCP is the heart of the image intensifier. It multiplies electrons to enhance the image.
Military Specification (MIL-SPEC)
MIL-SPEC indicates that a product meets military specifications.
Modulation Transfer Function (MTF)
MTF measures an optical system's ability to reproduce detail from object to image.
Monocular
A monocular is a single-channel optical device, like the PVS-14.
Near-Infrared
Near-infrared refers to the shortest wavelengths of infrared light.
Peppering / Pepper Spots
These are tiny black specs found around the edge of a tube.
Phosphor
White Phosphor: Produces a monochrome white output image.
Green Phosphor: Produces a monochrome green output image.
Photocathode
The photocathode converts light energy into electrons.
Photocathode Sensitivity (Photo Response)
This measures how well the image intensifier converts light into an electronic signal.
Resolution
Resolution measures an image intensifier's ability to distinguish between objects.
Limiting Resolution: Measured in line pairs per millimeter.
System Resolution: Measured in cycles per milliradian.
Reticle (Reticle Pattern)
The reticle is an adjustable aiming point within an optical weapon sight.
Scintillation
Scintillation is a faint, random sparkling effect throughout the image area.
Screen
The screen is the phosphor layer inside the output optic. It converts electrons back into photons.
Signal-to-Noise Ratio (SNR)
SNR measures the magnitude of the signal compared to the noise. A higher SNR indicates better performance.
Stereoscopic Night Vision
This involves taking two views through one device, creating depth perception.
System Gain
System gain equals tube gain minus losses from system components.
Thermal Imaging
Thermal imaging detects radiation and temperature differences, creating thermal pictures.
Weaver Mounting System
This is a U.S. weapon mounting system for attaching sighting devices.
White Boxing
White boxing is similar to black boxing but uses a uniformly bright surface. It should only be a last resort.
Zeroing
Zeroing adjusts an aiming device to a weapon for projectile characteristics at known distances.
Zones 1/2/3 (Z1, Z2, Z3)
This describes where imperfections lie in the output image. Zone 1 is the inner third, Zone 3 is the outer edge, and Zone 2 is in between.

































Comments